The general use of aluminium as an indentation standard for the iteration of contact heights for the determination of ISO-14577 hardness and elastic modulus is challenged because of as yet not appreciated phase-changes in the physical force-depth standard curve that seemed to be secured by claims from 1992. The physical and mathematical analyses with closed formulas avoid the still world-wide standardized energy-law violation by not reserving 33.33% (h2 belief) (or 20% h3/2 physical law) of the loading force and thus energy for all not depth producing events but using 100% for the depth formation is a severe violation of the energy law. The not depth producing part of the indentation work cannot be done with zero energy! Both twinning and structural phase-transition onsets and normalized phase-transition energies are now calculated without iterations but with physically correct closed arithmetic equations. These are reported for Berkovich and cubecorner indentations, including their comparison on geometric grounds and an indentation standard without mechanical twinning is proposed. Characteristic data are reported. This is the first detection of the indentation twinning of aluminium at room temperature and the mechanical twinning of fused quartz is also new. Their disqualification as indentation standards is established. Also, the again found higher load phase-transitions disqualify aluminium and fused quartz as ISO-ASTM 14577 (International Standardization Organization and American Society for Testing and Materials) standards for the contact depth “hc” iterations. The incorrect and still world-wide used black-box values for H- and Er-values (the latter are still falsely called “Young’s moduli” even though they are not directional) and all mechanical properties that depend on them. They lack relation to bulk moduli from compression experiments. Experimentally obtained and so published force vs depth parabolas always follow the linear FN = kh3/2 + Fa equation, where Fa is the axis-cut before and after th
Ferroelectric ceramics have the potential to be widely applied in the modern industry and military power systems due to their ultrafast charging/discharging speed and high energy density.Considering the structural design and electrical properties of ferroelectric capacitor,it is still a challenge to ffnd out the optimal energy storage of ferroelectric ceramics during the phase-transition process of amorphous/nanocrystalline and polycrystalline.In this work,a ffnite element model suitable for the multiphase ceramic system is constructed based on the phase ffeld breakdown theory.The nonlinear coupling relationship of multiple physical ffelds between multiphase ceramics was taken into account in this model.The basic structures of multiphase ceramics are generated by using the Voronoi diagram construction method.The speciffed structure of multiphase ceramics in the phase-transition process of amorphous/nanocrystalline and polycrystalline was further obtained through the grain boundary diffusion equation.The simulation results show that the multiphase ceramics have an optimal energy storage in the process of amorphous polycrystalline transformation,and the energy storage density reaches the maximum when the crystallinity is 13.96%and the volume fraction of grain is 2.08%.It provides a research plan and idea for revealing the correlation between microstructure and breakdown characteristics of multiphase ceramics.This simulation model realizes the nonlinear coupling of the multiphase ceramic mesoscopic structure and the phase ffeld breakdown.It provides a reference scheme for the structural design and performance optimization of ferroelectric ceramics.
A new robust bio-inspired route by using lysozyme aqueous solution for surface modification on 1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX)was described in this paper.HMX crystals were coated by in situ phasetransition of lysozyme(PTL)molecules.The HMX decorated by PTL was characterized by SEM,XRD,FTIR and XPS,demonstrating a dense core-shell coating layer.The coverage of lysozyme on HMX crystal was calculated by the ratio of sulfur content.The surface coverage increased from 60.5% to 93.5% when the content of PTL was changed from 0.5 wt% to 2.0 wt%,indicating efficient coating.The thermal stability of HMX was investigated by in situ XRD and DSC.The thermal phasetransition temperature of HMX(β to δ phase)was delayed by 42℃ with 2.0 wt% PTL coating,which prevented HMX from thermal damage and sensitivity by the effect of PTL coating.After heating at 215℃,large cracks appeared in the naked HMX crystal,while the PTL coated HMX still maintained intact,with the impact energy of HMX dropped dramatically from 5 J to 2 J.However,the impact energy of HMX with 1.0 wt% and 2.0 wt% coating content(HMX@PTL-1.0 and HMX@PTL-2.0)was unchanged(5 J).Present results potentially enable large-scale fabrication of polymorphic energetic materials with outstanding thermal stability by novel lysozyme coating.
Jiahui LiuCongmei LinJianhu ZhangChengcheng ZengZhijian YangFude Nie
The non-ionizing and penetrative characteristics of terahertz(THz)radiation have recently led to its adoption across a variety of applications.To effectively utilize THz radiation,modulators with precise control are imperative.While most recent THz modulators manipulate the amplitude,frequency,or phase of incident THz radiation,considerably less progress has been made toward THz polarization modulation.Conventional methods for polarization control suffer from high driving voltages,restricted modulation depth,and narrow band capabilities,which hinder device performance and broader applications.Consequently,an ideal THz modulator that offers high modulation depth along with ease of processing and operation is required.In this paper,we propose and realize a THz metamaterial comprised of microelectromechanical systems(MEMS)actuated by the phase-transition material vanadium dioxide(VO_(2)).Simulation and experimental results of the three-dimensional metamaterials show that by leveraging the unique phase-transition attributes of VO_(2),our THz polarization modulator offers notable advancements over existing designs,including broad operation spectrum,high modulation depth,ease of fabrication,ease of operation condition,and continuous modulation capabilities.These enhanced features make the system a viable candidate for a range of THz applications,including telecommunications,imaging,and radar systems.
Zhixiang HuangWeipeng WuEric HerrmannKe MaZizwe A.ChaseThomas A.SearlesM.Benjamin JungfleischXi Wang
Thermal cloaks offer the potential to conceal internal objects from detection or to prevent thermal shock by controlling external heat flow. However, most conventional natural materials lack the desired flexibility and versatility required for on-demand thermal manipulation. We propose a solution in the form of homogeneous multilayer thermodynamic cloaks. Through an ingenious design, these cloaks achieve exceptional and extreme parameters, enabling the distribution of multiple materials in space. We first investigate the effects of important design parameters on the thermal shielding effectiveness of conventional thermal cloaks. Subsequently, we introduce an autonomous tuning function for the thermodynamic cloak, accomplished by leveraging two phasetransition materials as thermal conductive layers. Remarkably, this tuning function does not require any energy input. Finite element analysis results demonstrate a significant reduction in the temperature gradient inside the thermal cloak compared to the surrounding background. This reduction indicates the cloak’s remarkable ability to manipulate the spatial thermal field. Furthermore, the utilization of materials undergoing phasetransition leads to an increase in thermal conductivity, enabling the cloak to achieve the opposite variation of the temperature field between the object region and the background. This means that, while the temperature gradient within the cloak decreases, the temperature gradient in the background increases. This work addresses a compelling and crucial challenge in the realm of thermal metamaterials, i.e., autonomous tuning of the thermal field without energy input. Such an achievement is currently unattainable with existing natural materials. This study establishes the groundwork for the application of thermal metamaterials in thermodynamic cloaks, with potential extensions into thermal energy harvesting, thermal camouflage, and thermoelectric conversion devices.By harnessing phonons, our findings provide an unprecedented and practical
